How To Format Extra Hard Drive Windows 10

1. Different Hard Drive Formats
2. Format External Hard Drive Windows 10
3. How To Format Extra Hard Drive Windows 10 32-bit
4. Format New Hard Drive Pc

So this is how you can extend C drive space on Windows 10. Extend C Drive Space with AOMEI Partition Assistant; In the above section, we merged the whole D Drive with C Drive. However, if you want to add just 10 or 20 GB or whatever part of storage from D or any other drives then you can use AOMEI Partition Assistant. Tip: In the pop-up Microsoft Windows dialog, choose Format disk to go to format the new hard drive so that you can use it, such as storing data in it. From the following picture, you can see that a new hard drive has been successfully added to This PC.

On this page, we'll show you how to format hard drive in Windows 10, wipe a hard drive, and guide you through the process, making your drive ready for storing data, installing Windows, or other purposes.

Formatting is an essential step before you start using a new hard drive, an internal or external hard drive on Windows 10/8/7/XP/Vista. Whether you are using Windows 10 or old Windows 7, check out how to format a hard drive or an external hard drive on your own now.

Windows 10 Hard Drive Format Overview

People might need to format a hard drive or an external hard drive in Windows 10 for various reasons. Here is a list of reasons or let's call it benefits that explains why people intend to format their hard drives, external hard drives, USB or SD, etc., storage devices:

• Format new hard drive before usage
• Format to change a hard drive file system for some specific purposes
• Format a hard drive for a clean installation of the Windows system
• Reformat or wipe a hard drive to erase data, such as restoring the full capacity of a disk

However, only a few people know how to get the job done correctly. In the following, we'll introduce you to format a new hard drive in Windows 10, format internal/external hard drive, and how to reformat or wipe a hard drive on your own.

During the process, you may need to use Windows Disk Management, Windows File Explorer, Windows DiskPart, and even a third-party partition manager, etc., for help.

How to Format a New Hard Drive in Windows 10

Applies to: Format brand new hard drive or external hard drive on Windows 10.

Requested Tools: ①. New HDD/SSD or external HDD; ②. Connection cable - SATA Cable, power cable, or USB 3.0 connection cable; ③. Format tool - EaseUS partition manager or Disk Management.

If you have a new hard drive or a new external hard drive, you'll need to initialize it first and create a new partition on it before you can format it. The reason is that a new hard drive doesn't have a partition, and as a result, it won't appear in File Explorer.

But you can use a third-party partition manager software like EaseUS Partition Master or Disk Management for help. Insert or connect your new hard drive to the computer, start initializing a new HDD/SSD and format it in Windows 10 now:

Method 1. Initialize and Format a New Hard Drive using EaseUS Partition Master

Best for: Windows beginners

Advantages: Easy to operate

For most Windows beginners, Windows disk management is not user-friendly as the whole operating process is tricky for them. To help you quickly make the new hard drive usable again, here we suggest you try EaseUS Partition Master.

It's efficient and easy. You can start to format your own new hard drive now:

First. Initialize New Hard Drive

Step 1. EaseUS Partition Master. Connect the hard drive or SSD to PC.

Step 2. Initialize your HDD/SSD

Right-click the target HDD or SSD and select 'Initialize to MBR' or 'Initialize to GPT' according to your need.

Step 3. Click 'Execute Operation' to keep the changes.

Next. Create Partition on New Hard Drive

Step 1. Launch EaseUS Partition Master

On the main window, right-click on the unallocated space on your new hard drive and select 'Create'.

Step 2. Adjust the new partition size, file system, label, etc.

Set the size, partition label, drive letter, file system, etc. for the new partition and click 'OK' to continue.

Step 3. Confirm to create a new partition

Click on the 'Execute Operation' button and confirm to create a new partition by clicking 'Apply'.

Note that during the creating partition process, EaseUS Partition Master will automatically format the created partition, making it ready for usage immediately.

Method 2. Format New Hard Drive on Windows 10 using Disk Management

Best for: Experienced Windows users

Advantages: Free

To properly format a new hard drive, you need to be very careful while using Disk Management. To format a new hard drive using Disk Management, use these steps:

Step 1. Press 'Windows + R' keys, type diskmgmt.msc and click 'OK' to open Disk Management.

Step 2. Right-click the hard drive or SSD marked as 'Unknown' and 'Not Initialized,' and select 'Initialize Disk'.

If the disk shows as Offline, first right-click it and select 'Online'.

Step 3. In the Initialize Disk dialog box, check the disk to initialize. And then click 'OK' to accept the default partition style, or you can change the partition style (GPT or MBR) as you want.

• Master Boot Record (MBR) is for hard drives smaller than 2TB in size.
• GUID Partition Table (GPT) is for hard drives larger than 2TB in size.

Step 4. Find the initialized disk, right-click the unallocated space, and select the 'New Simply Value' option.

Step 5. Set up and format the created partition on the new hard drive.

Follow the on-screen instructions to set up volume size, drive letter, NTFS as the file system, and check the 'Perform a quick format' option.

How old is microsoft excel. Step 6. Click the 'Next' > 'Finish' button.

Depending on the size of the drive, it can take some time to finish. When the process completes, your new hard drive will be initialized, partitioned, and properly formatted.

How to Format an Internal/External (Used) Hard Drive in Windows 10

Applies to: Format a used internal or external hard drive in Windows 10/8/7/XP, etc.

Requested Tools: ①. HDD/SSD or external HDD; ②. Connection cable - SATA Cable, power cable, or USB 3.0 connection cable; ③. Format tool - EaseUS partition manager, Disk Management, File Explorer, DiskPart.

If you have a hard drive or an external hard drive already organized with partitions, you can format the existing partition to remove its content and start fresh with a clean drive. We cover the three most popular ways to format a partition, like displayed below.

Keep your hard drive or external HDD connected to your PC and choose one method that works best for you to start formatting the disk on your now:

Method 1. Format Hard Drive in Windows 10 with EaseUS Management Software

Best for: All levels of Windows users, specially designed for Windows beginners

Advantages: Easy & 4-Step Formatting

EaseUS Partition Master is a popular disk partition management tool that is available for all hard disk managing jobs, such as to format disk partition, extend system partition, settle low disk space problem, convert MBR to GPT without data loss and vice versa.

It even works when you failed to do the Windows 10 disk format job or can't format hard drive with other Windows formatting tools.

Video Tutorial to Format HDD/SSD in Windows 10

Step-by-step Guide to Format Hard Drive/External HDD in Windows 10

Step 1: Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose 'Format'. Vegas pro 15 suite.

Step 2: In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3), and Cluster size for the partition to be formatted, then click 'OK'.

Step 3: Then you will see a warning window, click 'OK' in it to continue. How do you play family feud.

Step 4: Click the 'Execute Operation' button in the top-left corner to review the changes, then click 'Apply' to start formatting the partition on your hard drive.

Repeat the whole process to format all existing partitions on your hard drive one by one.

Method 2. Format Windows 10 Hard Drive Partition using File Explorer

Best for: Windows beginners

Advantages: Free

Another easy way is to use Windows File Explorer to format a working hard drive or external hard drive on your Windows PC. Here are the steps:

Here, we'll take formatting an external hard drive as an example to show you the formatting process.

Step 1. Press 'Windows key + E' to bring up the Windows Explorer.

Or you can click and open up the 'Computer' in Windows 7 or 'This PC' in Windows 10.

Step 2. Right-click on the connected external hard drive or internal hard drive partition and select 'Format'.

Step 3. On the format window, select the desired file system - NTFS for your device.

Step 4. Check 'Quick Format' and click 'Start'.

After this, click 'OK' to confirm and finish the formatting. If you have several partitions created on your hard drive, repeat the whole process till you cleaned all the partitions.

Method 3. Format Hard Drive with Windows Disk Management

Best for: Experienced Windows users

Advantages: Free

Windows 10 offers users a built-in disk management tool to create, delete, extend, shrink, and format partitions. Here are the steps to format hard drive partition using Disk Management:

Step 1. Right-click on Windows icon and select 'Disk Management'.

Step 2. Right-click on the target drive or partition and click on 'Format'.

Step 3. Select the file system and set the cluster size.

Step 4. Click 'OK' to format the drive.

Repeat the steps to format the rest partitions on your hard drive.

Method 4. Format Hard Drive with Diskpart in Command Prompt

Best for: Experienced users & administrators

Advantages: Free

Unlike Disk Management and File Explorer, DiskPart Command Prompt does more than merely formatting disk. It also lets you do other more advanced operations on your computer.

Be careful with every step, as any false operation may cause serious results. Here are the steps to format hard drive partition using DiskPart Command Prompt:

Step 1. Type cmd in the search box in Windows 10, right-click on Command Prompt, and choose 'Run as administrator'.

Step 2. In the command prompt, type diskpart and press 'Enter'.

Step 3. Type the following command lines and hit Enter each time:

• list disk
• select disk + disk number ( for example, select disk 2)
• list volume
• select volume+ volume number
• format fs=ntfs

Repeat the process till you have formatted all exiting volumes on your hard drive.

Step 4. Type exit and hit Enter to close the command window.

All the ways above can help you format a used hard drive or external hard drive in Windows 10. If you want a comprehensive solution that can help you manage your disk easily, we highly recommend you try EaseUS Partition Master.

How to Reformat or Wipe a Hard Drive in Windows 10

Applies to: Clean up whole hard drive data by re-formatting or wipe hard drive at one time in Windows 10/8/7.

Different Hard Drive Formats

Requested Tools: ①. HDD/SSD or external HDD; ②. Connection cable - SATA Cable, power cable, or USB 3.0 connection cable; ③. Hard disk wipe tool - EaseUS partition manager

Sometimes, people may want to re-format or wipe a hard drive so as to clean up existing data on the device thoroughly. Reformatting a hard drive indeed works but you have to repeat the formatting again and again.

In this part, we've collected an efficient way to help you wipe hard drive data, clear all existing data on the device at one time.

Wipe a Hard Drive using EaseUS Partition Master

Best for: All levels of Windows users

Advantages: One-click to wipe a hard drive several times

Let's see how to wipe your hard drive easily at one time:

Step 1. Install and launch EaseUS Partition Master.

Select the HDD or SSD which you want to wipe. And right-click to choose 'Wipe Data'.

Step 2. Set the number of times to wipe data.

You can set to 10 at most. Then click 'OK'.

Step 4. Click 'Apply' to apply the changes.

Click 'Execute the operation' and then click 'Apply' to start wiping data.

After this, you can restart your PC and use the hard drive like a brand new disk by then.

How to Recover Data from Formatted Hard Drive

Data loss issue due to misformatting hard drive or formatting without backups occurs from time to time. Formatting doesn't erase the data on the disk, only removing the address tables.

However, without a data recovery tool, you cannot recover data from a formatted hard drive. EaseUS Data Recovery Wizard is capable of recovering lost data even if you accidentally format a disk without a backup.

This top-notch file recovery software enables you to quickly and simply restore lost data because of hard drive formatting, emptying recycle bin, partition loss, OS crash, virus attack, and more. You can even use it to recover permanently deleted files in only a few clicks.

Now, download this robust data recovery program and recover data after formatting hard drive.

Step 1. Choose the partition.

Launch EaseUS formatted data recovery software after the installation. Choose the hard drive partition which you've accidentally formatted. Click 'Scan'.

Step 2. Select wanted files.

After the scanning process, you can click 'Filter' to filter a specific file type to quickly find wanted files.

Step 3. Recover files to a secure location.

Select the data files you wish to recover. Click 'Recover'. Choose a location to store the files and click 'OK'.

Conclusion and Format Hard Drive FAQs

On this page, we covered comprehensive solutions to help you resolve formatting hard drive issues on your own. With the presented methods, you can easily format a brand new hard drive, format an internal or external hard drive, and even thoroughly wipe a hard drive in Windows 10.

Format External Hard Drive Windows 10

As for Windows beginners, we suggest you back up important data first, then apply a practical formatting tool like EaseUS Partition Master for help.

We collected some top concerned questions and list answers here. If you have the same questions about hard drive formatting in Windows 10, check the following FAQs.

1. Can't format hard drive in Windows 10, how to fix?

When you can't format a hard drive in using Disk Management or file explorer, give EaseUS Partition Master a shot. It can directly resolve your issue with its Format feature.

You can also refer to Windows Was Unable to Complete the Format for further fixes.

2. How do I format hard drive when the disk management format option greyed out?

When you are making hard drive maintenance with free disk management tools, you may encounter the issue - 'Disk Management format greyed out'.

You can't format a partition because the 'Format' option is greyed out in Windows 10/8/7. To solve the 'Format volume greyed out' issue, we have offered these solutions:

• Restart PC
• Format Hard Drive using Disk Management alternative, like EaseUS Partition Master
• Run CMD to format hard drive

For a detailed guide, you may refer to 'Format Option Greyed Out' for help.

3. How do I format HDD or external hard drive to FAT32?

According to some game players, sometimes, they need to format a hard drive or an external hard drive to FAT32 for specific usage. However, the normal formatting way can't help.

When there is no FAT32 option in Windows 10 File Explorer or Disk Management, you can apply either the Windows CMD or the third-party partition manager - EaseUS Partition Master to format device to FAT32 in Windows 10/8/7.

Turn to professional FAT32 formatting tools for help and format disk to FAT32 now.

For example, formatting deletes all files and directories which makes it the quickest method for erasing all data. Nevertheless, the main reason to format a disk is changing its file system. Windows works with several file systems including FAT32, exFAT and NTFS, each of them having their pros and cons. While NTFS is mostly used for internal HDDs with Windows 10, choosing the file system when formatting an external USB drive is quite an important stage.

How To Format Extra Hard Drive Windows 10 32-bit

Note. Most third-party disk utilities for Windows use what is called 'quick format'. That is, they do not actually erase all data from the disk but mark the entire space as free for writing new data. Files and directories are left intact after such formatting, and you can easily recover them using our programs. However, if you need to erase all data from the disk without any chances for recovery, you should use 'full format' option or specialized third-party software.

Formatting a disk in Windows is very easy. The standard utility Disk Management will help you format the disk, create or remove partitions. Though, if formatting is all you want to do, there is an even easier way to go.

Note. If you want to format the disk where the operating system is installed (by default it's disk С:), Windows 10 will show you a warning: 'You cannot format this volume. It contains the version of Windows that you are using. Formatting this volume could cause your computer to stop working.' This is how your operating system prevents you from deleting system files accidentally. You can format such disk by either booting from a USB drive, or when reinstalling the operating system (in the course of installation, the wizard will ask you to select the volume where to copy files to, and will offer you several options for disk management).

Open File Explorer, select This PC on the left, choose a disk, right-click on it and then click on Format…

Format New Hard Drive Pc

The Format window contains several options (drop-down lists):

Capacity: this field shows the capacity of your disk. The drop-down list only shows the capacity of the disk you have chosen, so there's nothing to change or choose.

Note. If the disk contains errors, both of software or hardware origin, this drop-down list may show you several variant of capacity for such volume. Try to remember the correct disk capacity and find it on the list.

File system: depending on the disk size, you will see several settings, including FAT32, exFAT, NTFS and REFS . If you are going to format a volume larger than 32 GB, you will not see the FAT32 option.

Note. There are several ways to format a disk bigger than 32 GB in FAT32. One: download and install third-party software (for example, 'GUI version of fat32format'). Two: run Windows PowerShell as administrator and use the command 'format /FS:FAT32 X:', where Х is the letter assigned to the disk you are working on.

Allocation unit size: this setting determines the maximal disk cluster size, i.e. the size of the smallest unit of space where data will be written. We recommend leaving this value at default unless you have really sound reasons to modify it.

Note. Cluster size is the minimal disk space allocated for writing a file. The larger the cluster, the quicker are input-output operations, and the quicker your computer works with the disk. Yet if you're going to store lots of smaller files, it's better to use small cluster size so that small files will take less space on the hard disk.

Restore device defaults: use this button to change all settings in the Format… window to default values for any disk.

Volume label: enter a new disk name so it will be shown in the File Explorer.

Quick format: This setting is there by default, and the program will run high-level formatting of the selected volume. It is performed quick and easy as it cleans the MBR (boot sector) and writes an empty table of the selected file system. The disk space is then marked as ready for overwriting, but without actual cleaning of clusters (i.e. erasing data). Uncheck the box to run low-level format (also known as full format) which takes up much longer but it ensures full cleaning of each disk sector (writing zeros instead of data).

To start the formatting, just click Start.

Note. Remember that all data will be erased from the disk, so make sure you have backed up all necessary files and directories!

The operating system will show you the warning that you can lose all your data. Click OK to start formatting.

When the process is over, you will get a clean and formatted disk.